Spray Adhesives for Screen Printing
Spray Adhesives for Screen Printing
Screen Printing inks > Spray Adhesives for Screen Printing
Takter 1000
DESCRIPTION:Spray adhesive for screen printing, not heat-resistant. Does not stain or transfer to fabrics. We recommend using this product when flash lamps are not used.
MAIN FEATURES:
- Does not transfer onto fabric or printed fabrics.
- Does not stain fabrics.
- Suitable for cotton, silk, wool, synthetic fabrics, cotton, and blends.
- Withstands many applications.
- It has good heat resistance.
- It is also suitable for the embroidery industry to keep fabric stable during embroidery.
Container: 600 ml.
Code: 10000610.
|
BASE CHEMISTRY BASE: Synthetic rubbers and solid resins SOLVENTS: Hydrocarbon group, benzene and homologues absent PROPELLANT: Odorless denatured hydrocarbon COLOR: Light yellow VISCOSITY: Medium CFC-FREE APPLICATION: TAKTER® 1000 is a high-tack adhesive specifically designed for the textile screen printing industry. It is suitable for holding fabrics to their substrate during printing. DIRECTIONS FOR USE Shake the can well before use. Spray the product from a distance of 25-30 cm. Remove with washing solvent. PACKAGING 600 ml aerosol spray BOX: 12 pieces. (Also sold individually) |
Hi-Tak 2000
DESCRIPTION:Screen printing spray adhesive, heat resistant. It does not stain or transfer onto printed fabrics.
MAIN FEATURES:
- It does not transfer onto printed fabrics or fabrics.
- It does not stain fabrics.
- It is suitable for cotton, silk, wool, synthetic fabrics, cotton, and blends.
- It withstands many applications.
- It has good heat resistance.
- It is also suitable in the embroidery industry for keeping the fabric stable during embroidery.
- In cut rooms, it ensures the pattern adheres to the fabric during cutting.
Container: 600 ml.
Code: 10000010.
|
PHYSICAL AND CHEMICAL CHARACTERISTICS: BASE COMPONENTS: Non-crystallizing gums, solid resins. COLOR: Slightly amber. VISCOSITY: Medium. DRY CONTENTS: 40% HEAT RESISTANCE: Good Other components present are stabilizers (antioxidants 0.1%). PROPELLANTS: Colorless, odorless, non-toxic denatured hydrocarbons. USE Hi-Tak 2000 is a high-temperature resistant spray adhesive, specially formulated to hold fabric in place during screen printing. It resists the temperatures of heat hoods very well and has a high adhesive strength that allows for many applications. It is suitable for both light fabrics (cotton, polyester) and heavy fabrics (wool). Thanks to its formulation, Hi-Tak 2000 does not stain fabrics and does not transfer. DIRECTIONS FOR USE Shake well before use. Spray onto the screen printing machine table from a distance of about 30 cm, wait a few seconds for the solvents to evaporate, and then begin application. For any stains, use perchloroethylene. PACKAGING 600 ml aerosol spray BOX: 12 units. (also sold individually) |
Takter 3000
DESCRIPTION:Strong spray adhesive for screen printing, resistant to heat hoods. Does not stain or transfer onto printed fabrics.
MAIN FEATURES:
- Strong permanent spray adhesive suitable for screen printing on fabrics.
- Resists high temperatures.
- Specifically for heat hoods
- Does not transfer onto printed fabrics or fabrics.
- Does not stain fabrics
- Suitable for cotton, silk, wool, synthetic fabrics, cotton, and blends
- Withstands many applications
Container: 600 ml
Code: 10000310
|
FEATURES PHYSICAL AND CHEMICAL CHARACTERISTICS: BASE COMPONENTS: Non-crystallizing gums, solid resins. COLOR: Slightly amber. VISCOSITY: Medium. DRY CONTENTS: 40% HEAT RESISTANCE: Good Other components present are stabilizers (antioxidants 0.1%). PROPELLANTS: Colorless, odorless, non-toxic denatured hydrocarbons. USE TAKTER 3000 is a high-temperature resistant spray adhesive, specially formulated to hold fabric in place during screen printing. It resists the temperatures of heat hoods very well and has a high adhesive strength that allows for many applications. It is suitable for both light fabrics (cotton, polyester) and heavy fabrics (wool). Thanks to its formulation, TAKTER 3000 does not stain fabrics and does not transfer. DIRECTIONS FOR USE Shake well before use. Spray onto the screen printing machine table from a distance of about 30 cm, wait a few seconds for the solvents to evaporate, and then begin application. For any stains, use perchloroethylene. PACKAGING 600 ml aerosol spray BOX: 12 pieces. (Also sold individually) |
Takter 4000
DESCRIPTION:Extra-strong spray adhesive for screen printing, highly resistant to heat. Does not stain or transfer to fabrics. This product is recommended for use with flash lamps only.
MAIN FEATURES:
- Resists heat
- Does not stain fabrics or transfer
- Resists many applications
- Does not stain printing machines
- A strong adhesive
- Suitable for silk, terracotta, wool, synthetics, and mixed fabrics
Container: 600 ml
Code: 10000320
|
CHEMICAL-PHYSICAL CHARACTERISTICS: COMPONENTS BASE: Non-crystallizing gums, solid resins, and H.T. additive. PROPELLANTS: Colorless, odorless, non-toxic denatured hydrocarbons. CFC-FREE. COLOR: Transparent. VISCOSITY AT 25°C: Medium. TEMPERATURE RESISTANCE: Very good, strong resistance to heat. CFC-FREE. USES: TAKTER® 4000 is a high-temperature spray adhesive specially formulated to hold fabric in place during screen printing. It resists heat very well and has a high adhesion that allows for many applications. Allows for better print quality. DIRECTIONS FOR USE Shake well before use. Spray onto the screen printing machine table from a distance of about 30 cm. Best results are achieved at high temperatures. Remove with solvent. PACKAGING 600 ml aerosol spray BOX: 12 pieces. (Also sold individually) |
Takter 1
DESCRIPTION:Extra strong water-based spray adhesive for screen printing, very resistant to heat hoods. Does not stain or transfer to fabrics.
MAIN FEATURES:
- Non-toxic
- Resists high temperatures (heat hoods)
- High adhesion
- Allows many applications
- Contains no solvents or harmful components
- Easily removable with water
- Does not transfer to fabrics
- Reactivates with water
Container: 400 ml
Code: 10000510
|
FEATURES PHYSICAL AND CHEMICAL COMPONENTS: BASE COMPONENTS: Non-crystallizing gums, solid resins, water-based natural rubber. COLOR: White Emulsion. ODOR: Odorless. VISCOSITY: Medium. PROPELLANT: Blend of odorless, non-toxic gases. Does not contain CFCs. SOLVENTS: None. TEMPERATURE RESISTANCE: Excellent. Up to 150/170°C. USE TAKTER® 1 is a new, highly concentrated water-based spray adhesive formulated with select, eco-friendly raw materials and specifically designed to hold fabric in place during screen printing. It is suitable for both lightweight fabrics (cotton, polyester) and heavy fabrics (wool). TAKTER® 1 is the new generation of spray adhesives for screen printing. Thanks to its formulation, screen printing tables are easily washable with water, and the dry film on the tables can be easily reactivated with water. TAKTER® 1 works very well when the substrates are warm, as the water evaporates and the adhesive film bonds immediately. DIRECTIONS FOR USE Shake the can well before use. Spray the product on the substrate to be adhesiveized. Wait a few seconds for the surface to dry. Place the fabric to be printed on the substrate and proceed with printing. Best results are obtained when the substrate is warm, as it speeds up the surface drying of the sprayed adhesive film. It is therefore recommended to use it with screen printing machines equipped with heat hoods and after the substrate has warmed up slightly. TAKTER® 1 can be removed with water. PACKAGING 400 ml aerosol spray BOX: 12 pieces. (Also sold individually) |
Temporary Adhesive 650
DESCRIPTION:Medium strength spray adhesive for screen printing. It does not stain or transfer onto fabrics.
MAIN FEATURES:
- Resists heat
- Does not stain or transfer onto fabrics
- Suitable for silk, terracotta, wool, synthetics, and mixed fabrics
Container: 500 ml
Code: 10000111
|
CHEMICAL-PHYSICAL CHARACTERISTICS: BASE COMPONENTS: Non-crystallizing gums, solid resins, and H.T. additive. PROPELLANTS: Hydrocarbons Denatured, colorless, odorless, non-toxic. CFC-FREE. COLOR: Transparent. VISCOSITY AT 25°C: Medium. TEMPERATURE RESISTANCE: Good, heat-resistant. CFC-FREE. USE: TAKTER® 650 is a temperature-resistant spray adhesive specially formulated to hold fabric in place during screen printing. It guarantees medium adhesion. INSTRUCTIONS FOR USE: Shake well before use. Spray onto the screen printing machine table from a distance of about 30 cm. Best results are achieved at high temperatures. Remove with solvent. PACKAGING 500 ml aerosol spray BOX: 12 pieces. (Also sold individually) |
Aprimaglia
DESCRIPTION:Spray cleaning solvent for reopening screen meshes clogged with ink.
MAIN FEATURES:
- Used to open the dry areas of the screen.
- Can be used directly on the mounted screen.
- Suitable for both base inks Palstisol water-based
Container: 500 ml
Code: 10000210
|
CHEMICAL BASE: BASE: mixture of aliphatic solvents PROPELLANT: denatured, odorless hydrocarbon SOLVENTS: hydrocarbons (group: benzene, xylene, etc. Absent) ODOR: solvent, characteristic COLOR: colorless APPLICATION The STARTER LOCK is used To open dry areas of the screen caused by drying ink. Its very fast and effective action allows for immediate reprinting, thus avoiding the need to clean the stencil with a cloth soaked in solvents. Easy to use, simply spray a thin film onto the closed meshes and the screen reopens. Thanks to its special formulation, APRIMAGLIA can be used with all types of inks, except thick films that dry through oxidation or catalysis; its activating power is immediate. Suitable for plastisol and water-based inks. DIRECTIONS FOR USE Shake the aerosol well before use. Spray the product from a distance of 30 cm. Spray onto the blocked screen, then make a few prints on the waste material to open the screen. PACKAGING 500 ml aerosol spray BOX: 25 pieces. (Also sold individually) |
Takter 310
DESCRIPTION:Antistatic spray. Eliminates electrostatic charges from sprayed surfaces. After use, the surface remains clean and dust-free longer than a surface cleaned with a regular detergent. Suitable for cleaning and making antistatic: screens, scanners, computers, worktops, car interiors, tables, fabrics, and plastic parts.
MAIN FEATURES:
- Does not stain fabrics or transfer
- For plastic, rubber, wood, fabric, and paper surfaces
- Does not stain
Container: 400 ml
Code: 10000330
|
CHEMICAL-PHYSICAL CHARACTERISTICS: BASE COMPONENTS: - PROPELLANTS: Colorless denatured hydrocarbons, Odorless, non-toxic. CFC-FREE. COLOR: Transparent. VISCOSITY AT 25°C: Medium. TEMPERATURE RESISTANCE: Good, heat-resistant. CFC-FREE. APPLICATION: The STARTER MESH OPENER is used to open dry areas of the screen caused by drying ink. Its very rapid and effective action allows for immediate reprinting, thus avoiding the need to clean the stencil with a cloth soaked in solvents. Easy to use, it sprays a thin film on the closed meshes and the screen reopens. Thanks to its special formulation, STARTER MESH OPENER can be used with all types of inks, except thick films that dry by oxidation or catalysis; its activating power is immediate. Suitable for plastisol and water-based inks. PACKAGING 400 ml aerosol spray BOX: 12 pieces. (Also sold individually) |
Takter 330
DESCRIPTION:Spray blackener. Increases the toner density of films, improving engraving.
MAIN FEATURES:
- Used to open the dry areas of the printing screen.
- Can be used directly on the mounted printing screen
- Suitable for both palstisol-based and water-based inks
Container: 500 ml
Code: 10000210
|
PHYSICAL AND CHEMICAL CHARACTERISTICS: BASE COMPONENTS: special low surface tension compounds APPEARANCE: transparent, Liquid PROPELLANT: Odorless denatured hydrocarbons. Flammable ODOR: Odorless DOES NOT CONTAIN CHLORINATED AGENTS DESCRIPTION TAKTER® 330 is a spray blackener formulated to increase the density of film toner, thus improving engraving. This product avoids the need to apply to photomechanical film and improves print sharpness. TAKTER® 330 does not contain chlorinated solvents and does not dull the film. DIRECTIONS FOR USE Shake the can before use. Spray the product onto the areas to be treated from a distance of 15 cm, covering the entire black area. Wait for the product to evaporate and then cut the film. PACKAGING 500 ml aerosol spray BOX: 12 pieces. (Also sold individually) |
Silicone Extra
DESCRIPTION:Silicone oil-based lubricant for yarns, needles, leather, rubber, plastic, polyethylene, cutter blades, shoe uppers, zippers, and curtains. Anti-static and slippery for paper, cardboard, fabrics, plastic, rubber, and worktops. Release agent for plastic and rubber molding. Water-repellent, anti-oxidation protector. Non-greasy and non-staining.
MAIN FEATURES:
- Anti-adhesive silicone spray, slippery, lubricating, water-repellent, protective, polishing.
- Release agent for plastic and rubber
- Slippery
- Lubricant
- Water-repellent
- Anti-adhesive for paper, plastic, rubber
- Protector for rubber parts
- Non-greasy
Container: 500 ml
Code: 10000110
|
FEATURES CHEMICAL AND PHYSICAL CHARACTERISTICS: APPEARANCE: Clear, liquid PROPELLANT: Odorless denatured hydrocarbons. Flammable ODOR: Odorless DIRECTIONS FOR USE Shake the can before use. Spray the product on the areas to be treated from a distance of 15 cm. PACKAGING 500 ml aerosol spray BOX: 12 pieces. (Also sold individually) |
Silicone Spray 104
DESCRIPTION:Silicone Spray more concentrated than Silicone Extra. It acts on treated surfaces as a lubricant, antistatic, slippery, and anti-adhesive agent.
MAIN FEATURES:
- Anti-adhesive silicone spray, slippery, lubricating, water-repellent, protective, and polishing.
- Release agent for plastic and rubber
- Slippery
- Lubricant
- Water-repellent
- Anti-adhesive for paper, plastic, and rubber
- Protector for rubber parts
- Non-greasy
Container: 500 ml
Code: 10000710
|
PHYSICAL AND CHEMICAL CHARACTERISTICS: APPEARANCE: Clear, liquid PROPELLANT: Odorless denatured hydrocarbons. Flammable ODOR: Odorless DIRECTIONS FOR USE Shake the can before use. Spray the product on the areas to be treated from a distance of 15 cm. PACKAGING 500 ml aerosol spray BOX: 12 units. (Also sold individually) |
Hi-Tak 2200
DESCRIPTION:Extra-strong, water-based liquid adhesive for screen printing, highly resistant to heat. It does not stain or transfer to fabrics. It is usually applied by spray or brush.
MAIN FEATURES:
- Extra-strong water-based liquid adhesive
- Can be applied by spray or brush
- Dilutable with water up to 70% - 50%
- Reactivated with water
Container: 25 kg
Code:
10000820 - Hi-Tak 2200 5 kg
10000920 - Hi-Tak 2200 5 kg thickened
100001930 - HI-TAK 2200 3 kg BAG Diluted
100001830 - HI-TAK 2200 3KG BAG concentrated
|
PHYSICAL AND CHEMICAL CHARACTERISTICS: Base: Blend of synthetic rubbers, resins, and cross-linkers Appearance: White emulsion Odor: Odorless VOC=zero pH: 5 Dry residue (105°C): 60% Viscosity at 25°C: 300 mPa.s Peel adhesion: 1100g/2.5 cm Adhesiveness: high Temperature resistance: excellent APPLICATION: HI-TAK 2200 is a highly concentrated liquid adhesive in aqueous emulsion, specifically formulated to hold fabric in place during screen printing. It is highly resistant to high temperatures (heat hoods) and has a high adhesive strength that allows for many applications. It is suitable for both lightweight fabrics (cotton, polyester) and heavy fabrics (wool). Thanks to its formulation, HI-TAK 2200 does not stain fabrics or transfer. It is resistant to long periods of storage, is very stable, non-flammable, and easily removable with water. Its concentrated formula allows for many printing runs. DIRECTIONS FOR USE Use with: Compressor: Pour the product into the appropriate container and screw it onto the compressor's gun. Spray the product evenly onto the work surface from a distance of 25 cm. Brush: Apply the product evenly onto the work surface, preferably while it's already warm. HI-TAK 2200 can be removed with water. HI-TAK 2200 can be diluted with water up to 70%. For good quality, dilution up to 50% is recommended. |